Tarpaulin Plastic Fabric Flex Banner PVC Grommet Rechargeable Battery Automatic Hole Eyelet Punching Machine

Product Description

 

Product Description

Product Name	Rechargeable Automatic Punching Machine
Weight	25kg
Package size	58*39*63CM
Die&grommets sizes	10MM
Power	60w
Frequency	50-60HZ
Voltage	24V
Usage	Advertising Printing, printing and packaging bag nonwoven cloth shoes and hats garments tarpaulin etc. Corn deduction riveting.

Rechargeable Automatic Punching Machine Temperature: Temperature on-off button in the hot air welder tube. Open hot welder tube.T rise when clockwise rotation, vice versa. T depends on the media's thickness. If the mediamelted in 3s, this T will be suit. (It just our suggest , please try it by yourselves. ) Welding: Make sure the right wheel edge press the seam. Rise the hot welder tube, and leftpush it to into the seam quickly. Rise speed or reduce T if the material burnAfter splicing, first pull out the hot-air gun to make the air nozzle separate from the ground andthe wheel. For model C, first turn off the temperature counterclockwise Knob, the of switch can beturned off only when the temperature drops to the natural temperature. The hot air gun must not bepowered off at high temperature.After the temperature of model A/B is set, it has its own memory andautomatic heat dissipation function. After work. turn off the heating switch and the hot air heater willautomatically ventilate and coolHowever, the previously set temperature is not changed. Do not work in rainy day. Please work on clean& smooth ground. Please read the manual before use.Do not dismantle the equipment under the electricWarranty: One year (without hot welder tube) Not inform product upgrade. Any questions, please ask the distributor. Manual just for reference.All rights due to factory. Instructions for machine use 1After assembling the machine, turn on the power switch and turn onthe power. After a few empty strokes, make sure there is no error, and then install the buttonhole to work 2The battery pack must use the charger provided by the company. 3In normal operation, short press the work key switch to make a deduction: Continuous operation: press and hold the work key for 3 secondsfor continuous operation; Short press the work key again to cancel the c-ontinuous work and restore the normal working state. The foot switch al-so works the same principle. 4During the warranty period, if the problem ofthe machine cannot besolved after communication, please mail it back to our unit. After self disassembly,our company will no longer provide warranty. 5Please be sure to use the special buckle of the unit to avoid the probl-em of buckle machine. 6The machine has a power display. lf the power is low, please replacethe backup battery. lf there is no backup, please charge and use it againWhen plugging in and out, please make sure that the power switch is off. Instructions for battery use 1 During long-term storage, 70% - 80% ofthe electricity shall be maintained. Complete charge and discharge once every 3 months. 2When the poweris less than 20%, it should be charged in time. It is not allowed to be in a state of no power for along time. 3When charging, try to turn on the switch and keep away from inflammables. 4After being fully charged, cut off the power supply (the factory is equipped with a timing socket, and each charge is within 5 hours). It is forbidden to stand by without load for a long time. 5Do not expose to the sun or other high temperature scenes. 6Do not rain or put in water. 7Do not smash and squeeze. lf you accidentally fall, please buy it againand use it again.

Details Images

Effect Display

Factory workshop